Binary Clock

The title sums it up, it's a clock that displays it's output in binary. It's computer controlled so it's easier for novices (like myself) to build and since the output is dictated by software it can be modified to do many other fun things.

Error creating thumbnail: /bin/bash: line 1: /usr/bin/convert: No such file or directory Error code: 127

The Files

The schematic: binary-clock.png (png format) or binary-clock.sch (eaglecad schematic)
The source code: lpt-bin-clock.tar.gz (version 0.2)

Basic List Of Materials

10 NPN transistors (2N2222 or 2N4401 or 2N3904, etc..)
1 4017 Decade counter
1 7805 5V voltage regulator
24 5mm red L.E.D.s
24 82ohm resistors
10 1Kohm resistors
2 10Kohm resistors
4 1N4004 diodes (or any regular diodes from telephones or radios)
1 100 MicroFarad capacitor (anything from 50 to 470 will work)
1 male DB25 connector (find one on an old printer cable)
1 12:1 transformer (with center tap for 240V)
1 Computer (>=333MHz,16MB ram,running some form of linux with gcc)

Notes On Construction

If you are using 240 volts to power the clock please use a 12:1 transformer's center tap (or a 24:1 transformer) otherwise if you don't you will have to heatsink your voltage regulator accordingly.
If you are afraid of mains current buy a 10v battery eliminator and pass it through the capacitor and voltage regulator.
To wire the L.E.D.s it's easier to lay them out in a grid on styrofoam and solder them in place.

Compiling And Using The Software

Download the above sourcecode and open up a shell/terminal/command-prompt then untar/gzip the software with "tar -xzvf lpt-bin-clock.tar.gz" then cd into the newly untarred directory.
Compile the software with "gcc -O3 -o lpt-bin-clock-0.2 lpt-bin-clock-0.2.c" - The software needs to be run as root to get port access. Run it like this: su -c "./lpt-bin-clock-0.2"
Press Ctrl + c to kill it. - To use the clock just plug it into the wall, into the computer's parallel port, cross both your fingers and toes and run the program.

Note About The Software

The software I wrote for this is crude but it works, if you want to modify it please do and if you need help understanding the software (due to some missing comments) please e-mail me at mailto:nikosapi@gmail.com

Media

Here are some photos of my binary clock:

Here is a video of it running: Bin-clock.avi (Click on Bin-clock.avi‎ when you get to the next page)

How To Read It

This is how to read it:

First row: tens of hours
Second row: ones of hours
Third row: tens of minutes
Forth row: ones of minutes
Fifth row: tens of seconds
Sixth row: one of seconds

Remember, this is all in binary. Go here to learn how to read binary.